BLUE BEAR Paint and Urethane Stripper is a consumer trusted remover that effectively removes multiple layers of paint, varnish, enamel, urethane, other single-component coatings, and lead based paint**. Formerly known as: SOY-Gel Paint and Urethane Remover •Removes Paints, Urethanes, Enamels, Sealers, Some Epoxies, and Many Other Coatings •Non-Caustic, Biodegradable, No Toxic Fumes •Removes Multiple Layers in One Application •SAFE! No Methylene Chloride •Safe for Use Indoors Overview BLUE BEAR Paint and Urethane Stripper is a tried and true stripper, used by consumers for over two decades. This consumer trusted remover effectively removes multiple layers of paint, varnish, enamel, urethane, other single-component coatings, and lead based paint*. Made with soybeans, Paint and Urethane Stripper is a safe, low odor, non-caustic, green coating remover for any DIY project. •SAFE! No Methylene Chloride •Removes Multiple Layers with ONE Application •Made with 100% American Grown Soybeans * Ideal for lead-based paint removal. The lead becomes encapsulated in the gel, preventing airborne particles and allowing for safe removal. Dispose of in accordance with all existing local, state, and federal ordinances.
02 Jun 2011
Why in the world did they paint all the hardware?!? Sometimes they were following the height of fashion when paint became affordable and available to the middles class. (Who wants to look at all those out of fashion and unsightly oak doors with solid brass hardware?)
There are no comments yet. Be the first to leave a comment
Coverage: Coverage per square foot varies depending on type and age of coating, number of layers and method of application. Horizontal: Average coverage is 125 sq ft per gallon (max 200 sq ft per gallon) Vertical: Average coverage is 75 sq ft per gallon
Test Area: Due to variances in surfaces and conditions, always test in a small, inconspicuous area before using on complete project. Application: Apply a thick layer of Paint & Urethane Stripper by pouring, brushing, squeegee, or commercial airless sprayer. Applying too thin will cause Paint & Urethane Stripper to dry out before removal is complete. Use a scraper to check if the coating is softened down to the surface. If not, wait longer and recheck. When the coating is completely softened, remove with a scraper. Clean Up: Use BLUE BEAR General Purpose Degreaser or water and a scrub brush, mop, or power washer to clean remaining thin residue. Remove excess coating(s) and Paint & Urethane Stripper before using a power washer for final cleaning. Allow surface to dry before further preparations. Usage Tips from the Pros: • For large application areas, use a professional airless sprayer or a 4-stage HVLP sprayer. • For tough coatings or numerous layers, use a notched ½” squeegee or ¼” gauge rake. Square footage will be greatly reduced. • When used outdoors, cover with a 2mil or thicker plastic to help keep Paint & Urethane Stripper wet and working.
Ingredients: N-Methyl Pyrrolidone, Dibasic Ester LVP, Soy Ester, Proprietary Thickening and Surfactant Blend Safe for Use On: Concrete, masonry, wood, and metal Do Not Use On: PVC, drywall, liimestone, plastic, veneer, terrazzo tile, or rubber
This item is eligible for our 20/20 quantity discount. If purchasing 20 or more of these please use the discount code 2020DISCOUNT at checkout to receive this discount.
This is usually a stock item that can ship out in 1-2 days from the time of your order. Rush shipping is available direct from the manufacturer in case quantities only.