Clark Tip Blind Shutter Hinge Set
Clark Tip Blind Shutter Hinge
Clark Tip Blind Shutter Hinge, Set of 4 Clark's Style shutter hinges: 2 right hand and two left hand hinges, to hang one windows' worth of shutters. Clark's Tip Shutter Hinges are surface-mounted onto the face of the shutter and window trim or house wall. They use a once-patented design that helps to lock the hinge in the open position. The shutter is lifted up slightly to disengage the hinge and allow closure. The shutter can also be removed completely without tools. Clark's hinges work in left-handed and right-handed pairs and are marked as such. Each hinge has two halves, one with a pintle and another with a gudgeon. The pintle half is mounted to the window with the pintle pointing up. Offset is measured from the shutter face to the center of the pin. Includes the small tiebacks to keep shutters closed also. Cast iron, need to be sealed with an oil based paint to prevent rusting. Screws are not included, recommended screws are #9 1-1/4" long zinc screws. Raw cast iron or WeatherWright coating process. Raw cast iron must be coated in an oil-based exterior-grade paint prior to installation.
-
Emily KlotzJul 13, 2013, 00:00What A Steal! I was so excited when I found out I could install my pair of shutters for such an awesome, affordable price! You can tell they are well made and meant to last! They are holding my shutters up excellently.