This is an unmarked antique interior mortise lock with a plated steel faceplate. An interior mortise lock is This is a lock which is used on an interior door that has been cut with a pocket or hole (called a mortise) into which the lock is to be fitted. Interior mortise locks commonly include a doorknob hub, through which a doorknob spindle is installed and doorknobs are mounted on each side and secured into place with pins or set screws; and a keyhole which accommodates an old-fashioned bit or skeleton key which in turn throws the deadbolt to lock and unlock the door. mortise locks have specific dimensions including backset, the measurement from the edge of the faceplate (the strip that shows when the mortise lock is installed in the door) to the center of the doorknob hub; and spacing, the measurement from the center of the doorknob hub to the center of the round part of the keyhole. The dimensions were not standardized in the 19th century so it is important to note the dimensions of your door prior to purchasing a mortise lock. Please find the item size by clicking Dimensions.
No Blog available for this product.
Dimensions of this item are: Backset 2-3/8", Case 3" x 3-5/8", Faceplate 7/8" x 5-1/4", Spacing 2-1/8".
This door lock or latch is in good overall condition with no damage that will prevent it from functioning. There is wear to the finish of this item that will be noticeable on the faceplate. No strike plate or key is included but may be available to be purchased separately, please email or call us if you are interested in this.
This antique item is currently in stock at our Rochester, New York warehouse. It can be shipped to you within 24 hours of processing your order, or you can pick it up at our Rochester, New York location. Please call to confirm stock status prior to coming to pick this item up.