ANTIQUE MORTISE  & RIM LOCKS

We have HUNDREDS of vintage mortise locks. If you want a certain size, we can search our inventory for you.

To initiate a lock search, please print the following diagram found here, and fill it out with the exact dimensions, to the 16" of an inch, and fax it to us at 585-325-3613. We MUST HAVE THIS FORM FILLED OUT CORRECTLY AND COMPLETELY OR WE CAN NOT PROCEED WITH A SEARCH. We ask that all measurements be in fractions of an inch; no decimals, because we use plain old fashioned rulers! We ask that you be very specific with the measurements so we are not on wild goose chases trying to find locks that do not exist. It is a waste of both our time and your time. Here are definitions of the primary measurements we need:

BACKSET: Measurement from the center of doorknob hole to the edge of the lock faceplate or edge of door if lock is absent.

SPACING: Measurement from the center of round part of keyhole to the center of the doorknob hole.

If you are handy with Photoshop, open up the diagram in Photoshop and add the dimensions and email it back to us at  chris@historichouseparts.com 

PLEASE NOTE: We will not take dimensions over the phone. We are not able to perform a mortise lock search without the diagram filled out completely. There is a search fee added onto the price of the lock(s) if we are successful. We have many searches we are performing, please be patient. We try to fulfill the searches within 7 days of receiving them. To proceed, we must have our diagram filled out completely!

Here are a couple of ours: (DIMENSIONS COMING SOON)

 

	A	B	C	D	E	F
Row 1
	VML012010-17: Faceplate: 5-1/4" x 7/8" Case: 2-3/8" x 3-3/4" Backset: 1-1/2" Spacing: 2-1/8" $95	VML012010-18: Faceplate: 5-3/8" x 7/8" Case: 4-5/8" x 4-1/8" Backset: 2-3/4" Spacing: 2-3/8" $65	VML012010-19: Faceplate: 5-1/2" x 7/8" Case: 3-5/8" x 3-5/16" Backset: 2-1/2" Spacing: 2-3/16" $55 SOLD	VML012010-20: Faceplate: 5-1/4" x 7/8" Case: 3-9/16" x 3-1/4" Backset: 2-1/2" Spacing: 2-1/8" $75 SOLD	VML012010-21: Reading Hardware Company Faceplate: 7-1/8" x 1-1/8" Case: 3-1/2" x 5" Backset: 2-5/8" Spacing: 3-3/16" $95 SOLD	VML012010-22: Faceplate: 6-15/16" x 1" Case: 4-5/8" x 3-9/16" Backset: 2-5/8" Spacing: 1-9/16" and 2-15/16" $150
Row 2
	VML012010-23: Faceplate: 5-1/2" x 1" Case: 3-1/8" x 3-3/4" Backset: 2-1/2" Spacing: 2-3/16" $60	VML012010-24: Faceplate: 5-11/16" x 15/16" Case: 3-9/16' x 3-7/16" Backset: 1-5/8" $55	VML012010-25: Rabbeted Faceplate Faceplate: 3-1/2" long Case: 1-7/8" x 2-1/4" Backset: 1-1/2" and 1-1/8" $75	VML012010-26: Faceplate: 3-3/4" x 3/4" Case: 1-3/4" x 2" Backset: 1-3/8" $35SOLD	VML012010-12: Brass Faceplate: 7-3/16" x 1-1/4" Case: 3-9/16' x 4-7/8" Backset: 2-5/8" Spacing: 1-3/8" and 3-1/4" $150	VML012010-13: Yale & Towne Bronze Faceplate: 6-1/16" x 1-1/16" Case: 3-1/2' x 3-5/16" Backset: 2-3/4" Spacing: 2-3/4" $85
Row 3
	VML012210-16: Rim Lock Case: 3-1/8" x 3-13/16" x 11/16" Backset: 2-1/4" Spacing: 2-1/8" Price: $175	VML012210-1: Bronze faceplate, includes strike plate Faceplate: 5-3/8" x 7/8" Case: 3-1/4" x 3-3/4" x 9/16" Backset: 2-3/8" Spacing: 2-1/8" Price: $125	VML012210-2: Bronze faceplate Faceplate: 5-1/2" x 7/8" Case: 3-3/16" x 3-1/8" x 1/2" Backset: 2-1/2" Spacing: 2-1/8" Price: $75	VML012010-8: Bronze Faceplate: 7-3/16" x 1" Case: 3-7/8' x 5" Backset: 3" Spacing: 1-7/16" and 3-7/16" $265	VML012010-9: Bronze Faceplate: 5-3/8" x 15/16" Case: 3-3/16' x 3-1/2" Backset: 2-3/8" $65	VML012210-10: Pocket Door Lock Faceplate: 7" x 1-1/4" Case: 4-3/16" x 5-3/16" x 9/16" Backset: 2-3/8" Spacing: 2-11/16" Price: $275
Row 4
	VML012210-11: Double pocket door set with bronze faceplates in an Aesthetic pattern, Faceplate: 8-5/8" x 1-3/8" Case: 6-5/16" x 4-3/16" x 5/8" Backset: 2-9/16" $265 pair	VML012210-27: Pair of Corbin pocket door locks, bronze faceplates, $175 pair	VML012210-14: Double pocket door set with bronze faceplates in an Aesthetic pattern, Faceplate: 8-5/8" x 1-3/8" Case: 6-5/16" x 4-3/16" x 5/8" Backset: 2-9/16" $235 pair	VML0218-02:   Catch: 2-5/8” x 1-1/4” Case: 3-3/4” x 2-5/8” Backset: 2-7/16”	VML0609-10: Store Door Lock Faceplate: 6-1/2" x 1-3/16" Case: 4-1/8" x 3-1/8" Backset: 2-1/4" Spacing: 2-3/8" Price: $125	VML0609-11: Russwin Mortise Faceplate: 5-7/16" x 15/16" Case: 3-9/16" x 3-3/8" Backset: 2-9/16" Spacing: 2-1/8" Price: $35
Row 5
	VML0218-03:   Faceplate: 3-1/4” x 15/16” Case: 3-1/2” x 1-5/8” Backset: 3”   $25	VML01309-10 and VML01309-11: Russell & Erwin privacy mortise locks, accept a 5/16" square thumbturn. Backset: 2-13/16" Spacing: 2-5/8" Faceplate: 3-9/16" x 4-1/6" x 11/16" $95 each, sold separately	VML0218-05: Faceplate: 9-1/8" x 1-1/8" Case: 6-15/16" x 4-3/8" x 3/4" Backset: 3-1/8" Spacing: 2" & 4" Marked on Lock Bolt: "?leach  Stewart & Co." $125	VML0218-06: Faceplate: 7-3/4" x 1-5/16" Case: 3-7/8" x 5-1/2" x 1" Backset: 2-3/4" Spacing: 3" $65	VML0609-12: Double Key, Decorative Faceplate Faceplate: 6-7/8" x 1" Case: 4-11/16" x 3-3/4" Backset: 2-5/8", 1-1/16" Spacing: 1-11/16", 3" Price: $55	VML0216-12: Faceplate: 5-3/8” x 15/16” Case: 3-1/4” x 3-1/2” Backset: 2-7/16” Spacing: 2”
Row 6
	VML0216-13: Faceplate: 6-9/16” x 1-1/4”   Case: 3-3/8” x 5-1/2” Backset: 2-1/4”   Spacing: 2-3/4”	VML0218-08:   Faceplate: 15/16” x 8” Case: 3-3/4” x 6” Backset: 2-1/2” Spacing: 3-3/4” SOLD	VML0218-09: Faceplate: 5-1/2" x 7/8" x 1/2" Case: 3-1/8" x 3-3/4" Backset: 2-3/8" Spacing: 2" $45	VML0218-10:   Faceplate: 4 x 1-1/16” Case: 3-5/16” x 2-1/8” Backset: 2-3/4”	VML0216-05: Faceplate: 5-9/16" x 7/8" Case: 3-3/4" x 3-1/4" Backset: 2-7/16" Spacing: 2-1/16" Price: $65 Mallory & Wheeler's "Arabic" pattern	VML0609-07: Iron Face Faceplate: 6-7/8" x 1-1/16" Case: 4-5/8" x 3-5/8" Backset: 2-5/8" Spacing: 2-9/16" Price: $125
Row 7
	VML0218-11:   Faceplate: 6-7/16” x 15/16” Case: 3-5/8” x 4-1/2” Backset: 2-3/4” Spacing: 2-5/8”	VML1111-01: Faceplate: 5-5/8" x 15/16" Case: 3-1/4" x 3-5/8" Backset: 2-5/8" Spacing: 2-1/8"	VML0919-9: Bronze faceplate R. E. & Co.  mortise lock with strike plate. $95 set Faceplate: 5-5/8" x 15/16" Case: 3-1/2" h x 3" w Backset: 2-1/2" Spacing: 2-1/8"	VML0919-5: Mallory Wheeler & Co. Bronze rabetted or rebated mortise lock with strikeplate. $375 set Faceplate: 7-3/4" x 1-1/4" Case: 3-1/2" w x 5-5/8" h Backset: 2-5/8" Spacing: 3-7/8"	VML1014-9: Yale & Towne Exterior Mortise Lock, with Cylinder and Strike Plate. $135 Size: Faceplate: 8-5/16" x 1-1/8" Case: 6-1/8" x 3-7/8" x 3/4" Backset: 2-13/16" Spacing: 4"	VML1021-22: A variety of passage latches. Strikes not available. Windsor Pattern: $45 each Arabic: $95 Mallory & Wheeler: $75
Row 8
	VML0216-14: Faceplate 5-11/16” x 1” Case 3-1/2” x 3-1/2” Backset 2-5/8” Spacing 2-1/8” SOLD	VML0216-15: Faceplate: 5-9/16” x 7/8” Case: 3-1/8” x 3-3/4” Backset: 2-1/2” Spacing: 2-1/4” SOLD	VML0216-10: Faceplate: 5-11/16" x 15/16" Case: 3-9/16' x 3-7/16" Backset: 2-5/8" Spacing: 2-1/8"	VML0217-20:   Faceplate: 7-1/8” x 1-1/8”   Case 3-3/16” x 4-13/16”   Backset 2-3/4”   Spacing: outer 2-13/16” inner 1-11/16”	VML02029-20: Passage latch with brushed nickel faceplate. Backset: 2-1/2" Faceplate: 3" x 7/8" Case: 3-1/8" x 1-1/2" x 11/16" Strikes included, New Old Stock. Multiples available. $25 each SOLD	VML0218-01:   Faceplate: 1-1/16" x 5-15/16"   Case: 3-1/4" x 4" x 13/16"   Backset: 2-3/4"   Spacing: 2-5/8"   "Russwin" $45
Row 9
	VML040110-18: Backset: 1-5/8" Spacing: 1-9/16" Faceplate: 4-3/8" x 3/4" Case: 2-1/4" x 2-7/8" x 1/2" $75	VML040110-19: Backset: 1-5/8" Spacing: 1-9/16" Faceplate: 4-3/8" x 3/4" Case: 2-1/4" x 2-7/8" x 1/2" $75	VDL050510-2: Solid brass rim lock, reproduction by the Colonial Williamsburg Federation. Size: 9-3/4" x 5-1/2" (body only). No key. $225	VML060810-21: Backset: 1-3/4" Spacing: 2-1/8" Faceplate: 5-1/4" x 7/8" x 9/16" Case: 2-5/8" x 3-5/8" x 9/16" $75	VML061110-28: Nice ornate bronze faceplate Sargent & Co. passage mortise with original strike plate. excellent condition. $95
Row 10
	VML0216-11: Faceplate: 6-3/4” x 1-1/8” Case: 3-7/17” x 4 3/8” x 5/8” Backset: 2-1/2” Spacing: 2-9/16” Pat. Date November 19. 1878 $150 SOLD	VML0609-06: Russell & Erwin Double Key with Thumbturn, brass face Faceplate: 6-7/8" x 1-1/16" Case: 4-7/8" x 3-5/8" Backset: 2-5/8, 1-3/8"" Spacing: 1-3/4", 3-5/16" Price: $125 SOLD	VML0216-06: Faceplate: 5-1/4" x 15/16" Case: 3-1/2" x 3-1/8" Backset: 2-1/4" Spacing: 2-1/8" SOLD
Row 11
	VML0216-01: Faceplate: 6-7/8" x 1" Case: 4-3/4" x 3-5/8" Backset: 2-3/4" Spacing: 1-3/4" & 3-1/8" Price: $95 SOLD	VML0216-02: Faceplate: 5-5/16" x 7/8" Case: 3-5/8" x 3-1/8" Backset: 2-3/8" Spacing: 2-1/8" Price: $15 SOLD	VML0609-14: Corbin Double Key Faceplate: 6-3/4" x 1" Case: 4-5/8" x 3-5/8" Backset: 2-5/8" Spacing: 1-5/8", 3" Price: $75 SOLD	VML0218-07: Faceplate: 7/8" x 6-3/4" Case: 3-1/2" x 4-5/8" x 3/4" Backset: 2-3/4" Spacing: 3-1/8" & 1-7/8" "Russwin" $65SOLD	VML0609-13: Corbin Faceplate: 6-3/8" x 1" Case: 4-1/2" x 3-5/8" Backset: 2-13/16" Spacing: 3" Price: $95 SOLD	VML0218-04: Faceplate: 7-3/16" x 1" Case: 5-1/2" x 3-5/8" x 7/8" Backset: 2-1/2" Spacing: 2-7/16" x 3-11/16" $65SOLD
Row 12
	VML0216-03: Faceplate: 7-1/2" x 1" Case: 3-1/8" x 3-9/16" Backset: 2-1/2" Spacing: 2-3/8" & 3-7/8" Price: $65 SOLD	VML0216-04: Faceplate: 6-3/4" x 1-1/8" Case: 4-7/8" x 3-3/8" Backset: 2-1/2" Spacing: 2-9/16" Price: $95 SOLD	VML0609-04: Norwalk Faceplate: 6-1/4" x 1-1/16" Case: 4-3/8" x 3-1/2" Backset: 2-3/4" Spacing: 2-3/4" Price: $55SOLD	VML0609-05: Store Door Lock Faceplate: 6-11/16" x 1-3/16" Case: 4-3/8" x 2-7/8" Backset: 2" Spacing: 2-3/4" Price: $125 SOLD	VML0609-08: Narrow Backset Faceplate: 6-3/4" x 7/8" Case: 3-1/4" x 3-5/8" Backset: 2-3/4" Spacing: 2-1/4" Price: $65 SOLD	VML0609-09:   Rabbeted/ Rebated with Strike Faceplate: 5-5/8" x 1-1/16" Case: 3-1/2" x 3-1/2" Backset: 2-9/16" Spacing: 2-1/4" Price: $175 SOLD

 

Vintage Hardware: We would be glad to search our inventory for you. There will be a hardware Search Fee charged, for items up to $20 the search fee is $5. For items over $20, the search fee is $10, this covers all items we find for you on any one invoice, not per item. You can email us a photo with what you are looking to info@historichouseparts.com  Thank you!